Quality Plastic Film and Plastic Sheets
Are PSA Duralar™ films suitable for outdoor use? No. Our PSA Duralar films is not made to be used outside because when exposed to ultraviolet light or moisture, the adhesive will loose it’s tack and breakdown. If you need to put this material outside, it must be contained in something else that will keep it … Read more
Is Metallized Duralar™ suitable for outdoor use? No. If sub-jected to sun and rain, the aluminum metal level on top of the film will corrode and fade quickly. This is not an appropriate film for outdoor use. Looking for film products that perform well under longer term outdoor or UV exposure? Check out our HDPE … Read more
Is our Laser-printable film suitable for outdoor use? No. If exposed to outdoor conditions will ruin the printed surface. If you need to use this material outside, it must be contained in something else that will keep it from being exposed to UV and moisture.
Is our inkjet film suitable for outdoor use? No. Our Inkjet Film is not made to be used outside. If you need to put this material outside, it must be contained in something else, that will keep it from being exposed to UV and moisture, so that the printed surface doesn’t run.
Is DoubleTack® adhesive film suitable for outdoor use? No. Our Double Tack is not made to be used outside because if exposed to UV light and moisture over time, the film’s adhesive layer will lose its adhesive strength.. If you need to use this material outside, it must be contained in something else that will … Read more
What is the heat resistance of our surface protection film? These films are designed for use in environments below 65C/140F. At higher temperatures, the adhesive becomes soft and loses adhesion. At really high temperatures (above 140C), the film begins to lose its orientation, becoming wavy and soft. If you need a matte film for higher … Read more
What is the heat resistance of our pressure sensitive adhesive (PSA) DuraLar™ films? PSA DuraLar is designed for use in environments below 65C/140F. At higher temperatures, the adhesive becomes soft and loses adhesion. At really high temperatures (above 150C), it begins to lose its orientation; it will become wavy and shrink. If you need a … Read more
What is the heat resistance of Laser-printable (PPC/Laser) film? PPC/Laser Ffilm is designed to handle the quick high heat exposure in toner-based plain-paper copiers and laser printers. Its coatings are designed to be used in environments up to 85C/185F. At higher temperatures, the printable surface could yellow, or lose some of its toner adhesion properties. … Read more
What is the heat resistance of our Double Tack™ film? Double Tack is designed for use in environments below 65C/140F. At higher temperatures, the adhesive becomes soft and loses adhesion. At really high temperatures (above 150C), it begins to lose its orientation; it will become wavy and shrink. If you need a matte film for … Read more
Are Surface Protection Films (SPF) archival? No. SPFs have a stick-and-stay adhesive coating on one side, which would interfere with the materials that need protecting. SPFs are pH neutral, and removable, qualities which makes them great for temporary laminations and surface protection, but not for archiving. How did you want to use this film? If … Read more
